dmesg - Gentoo 4.9 no-miti GCC 10 core2
Linux version 4.9.248-gentoo-x86_64-gcc (root@localhost) (gcc version 10.2.0 (Gentoo 10.2.0-r4 p5) ) #4 SMP Tue Dec 22 15:20:43 CET 2020
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008dfff] usable
BIOS-e820: [mem 0x000000000008e000-0x000000000008ffff] reserved
BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x000000008ad13fff] usable
BIOS-e820: [mem 0x000000008ad14000-0x000000008ad52fff] ACPI NVS
BIOS-e820: [mem 0x000000008ad53000-0x000000008ad68fff] usable
BIOS-e820: [mem 0x000000008ad69000-0x000000008ad8efff] ACPI data
BIOS-e820: [mem 0x000000008ad8f000-0x000000008ae39fff] usable
BIOS-e820: [mem 0x000000008ae3a000-0x000000008ae8efff] reserved
BIOS-e820: [mem 0x000000008ae8f000-0x000000008aecdfff] usable
BIOS-e820: [mem 0x000000008aece000-0x000000008aefefff] type 20
BIOS-e820: [mem 0x000000008aeff000-0x000000008af8efff] usable
BIOS-e820: [mem 0x000000008af8f000-0x000000008affefff] reserved
BIOS-e820: [mem 0x000000008afff000-0x000000008affffff] usable
BIOS-e820: [mem 0x000000008b000000-0x000000008f9fffff] reserved
BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ffe70000-0x00000000ffe9ffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000026f5fffff] usable
NX (Execute Disable) protection: active
efi: EFI v1.10 by Apple
efi: ACPI=0x8ad8e000 ACPI 2.0=0x8ad8e014 SMBIOS=0x8ad1b000
SMBIOS 2.4 present.
DMI: Apple Inc. MacBookPro10,1/Mac-C3EC7CD22292981F, BIOS 262.0.0.0.0 06/10/2020
Kernel/User page tables isolation: disabled
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x26f600 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0C0000000 mask FC0000000 uncachable
1 base 0A0000000 mask FE0000000 uncachable
2 base 090000000 mask FF0000000 uncachable
3 base 08C000000 mask FFC000000 uncachable
4 base 08B000000 mask FFF000000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x8b000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
RAMDISK: [mem 0x35af3000-0x36d70fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008AD8E014 000024 (v02 APPLE )
ACPI: XSDT 0x000000008AD8E1C0 0000B4 (v01 APPLE Apple00 00000000 01000013)
ACPI: FACP 0x000000008AD8C000 0000F4 (v04 APPLE Apple00 00000000 Loki 0000005F)
ACPI: DSDT 0x000000008AD82000 004D5C (v01 APPLE MacBookP 00100001 INTL 20100915)
ACPI: FACS 0x000000008AD1E000 000040
ACPI: FACS 0x000000008AD1E000 000040
ACPI: HPET 0x000000008AD8B000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: APIC 0x000000008AD8A000 0000BC (v02 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SBST 0x000000008AD88000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: ECDT 0x000000008AD87000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SSDT 0x000000008AD7F000 00053A (v01 APPLE SataAhci 00001000 INTL 20100915)
ACPI: SSDT 0x000000008AD7E000 000024 (v01 APPLE SmcDppt 00001000 INTL 20100915)
ACPI: SSDT 0x000000008AD79000 000D3E (v01 APPLE UsbPpt 00001000 INTL 20100915)
ACPI: SSDT 0x000000008AD77000 000159 (v02 APPLE IGHda 00001000 INTL 20100915)
ACPI: SSDT 0x000000008AD75000 000032 (v01 APPLE SsdtS3 00001000 INTL 20100915)
ACPI: SSDT 0x000000008AD73000 0015EB (v02 APPLE SsdtIGPU 00001000 INTL 20100915)
ACPI: SSDT 0x000000008AD6E000 0019AA (v01 APPLE TbtPEG11 00001000 INTL 20100915)
ACPI: SSDT 0x000000008AD6D000 000615 (v01 PmRef Cpu0Ist 00003000 INTL 20100915)
ACPI: SSDT 0x000000008AD6C000 000B3D (v01 PmRef CpuPm 00003000 INTL 20100915)
ACPI: SSDT 0x000000008AD6B000 000315 (v01 PmRef Cpu0Tst 00003000 INTL 20100915)
ACPI: SSDT 0x000000008AD6A000 00037A (v01 PmRef ApTst 00003000 INTL 20100915)
ACPI: DMAR 0x000000008AD69000 000088 (v01 APPLE IVB 00000001 AAPL 00000001)
ACPI: MCFG 0x000000008AD89000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: DMI detected to setup _OSI("Darwin"): Apple hardware
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000026f5fffff]
NODE_DATA(0) allocated [mem 0x26f5f4000-0x26f5f7fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000026f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000008dfff]
node 0: [mem 0x0000000000090000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x0000000040003fff]
node 0: [mem 0x0000000040005000-0x000000008ad13fff]
node 0: [mem 0x000000008ad53000-0x000000008ad68fff]
node 0: [mem 0x000000008ad8f000-0x000000008ae39fff]
node 0: [mem 0x000000008ae8f000-0x000000008aecdfff]
node 0: [mem 0x000000008aeff000-0x000000008af8efff]
node 0: [mem 0x000000008afff000-0x000000008affffff]
node 0: [mem 0x0000000100000000-0x000000026f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000026f5fffff]
On node 0 totalpages: 2073153
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 8819 pages used for memmap
DMA32 zone: 564388 pages, LIFO batch:31
Normal zone: 23512 pages used for memmap
Normal zone: 1504768 pages, LIFO batch:31
Reserving Intel graphics memory at 0x000000008ba00000-0x000000008f9fffff
Resetting Apple AirPort card (left enabled by EFI)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0008e000-0x0008ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0x8ad14000-0x8ad52fff]
PM: Registered nosave memory: [mem 0x8ad69000-0x8ad8efff]
PM: Registered nosave memory: [mem 0x8ae3a000-0x8ae8efff]
PM: Registered nosave memory: [mem 0x8aece000-0x8aefefff]
PM: Registered nosave memory: [mem 0x8af8f000-0x8affefff]
PM: Registered nosave memory: [mem 0x8b000000-0x8f9fffff]
PM: Registered nosave memory: [mem 0x8fa00000-0xe00f7fff]
PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xffe6ffff]
PM: Registered nosave memory: [mem 0xffe70000-0xffe9ffff]
PM: Registered nosave memory: [mem 0xffea0000-0xffffffff]
e820: [mem 0x8fa00000-0xe00f7fff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 33 pages/cpu s97624 r8192 d29352 u262144
pcpu-alloc: s97624 r8192 d29352 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2040732
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7826216K/8292612K available (9852K kernel code, 1335K rwdata, 2820K rodata, 1180K init, 760K bss, 466396K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:4352 nr_irqs:488 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2294.735 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.47 BogoMIPS (lpj=22947350)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160831
ACPI: 12 ACPI AML tables successfully acquired and loaded
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Speculative Store Bypass: Vulnerable
SRBDS: Vulnerable: No microcode
Freeing SMP alternatives memory: 32K
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-3615QM CPU @ 2.30GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (36715.76 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x8ad14000-0x8ad52fff] (258048 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
kworker/u16:0 (50) used greatest stack depth: 13960 bytes left
futex hash table entries: 2048 (order: 5, 131072 bytes)
RTC time: 15:28:03, date: 12/22/20
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Disabled all _OSI OS vendors
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Darwin)
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \: Used as first EC
ACPI: \: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \: Used as boot ECDT EC to handle transactions
ACPI: BIOS _OSI(Darwin) query honored via cmdline
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802654E7000 0008AD (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880265578C00 0003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880265654000 000119 (v01 PmRef ApCst 00003000 INTL 20100915)
ACPI : EC: EC stopped
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe9bfffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS assumes control of [PCIeHotplug SHPCHotplug AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-9b] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x8fa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:01.2: [8086:0159] type 01 class 0x060400
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:01.2: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xc1400000-0xc17fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xc1c00000-0xc1c0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc1c17100-0xc1c1710f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xc1c16c00-0xc1c16fff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xc1c10000-0xc1c13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xc1c16800-0xc1c16bff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
pci 0000:00:1f.2: reg 0x14: [io 0x309c-0x309f]
pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
pci 0000:00:1f.2: reg 0x1c: [io 0x3098-0x309b]
pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc1c16000-0xc1c167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc1c17000-0xc1c170ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [10de:0fd5] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
pci 0000:01:00.0: reg 0x30: [mem 0xc1000000-0xc107ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xc1080000-0xc1083fff]
pci 0000:00:01.0: ASPM: Could not configure common clock
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc10fffff]
pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
pci 0000:05:00.0: [8086:1547] type 01 class 0x060400
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:01.1: PCI bridge to [bus 05-9b]
pci 0000:00:01.1: bridge window [io 0x4000-0x6fff]
pci 0000:00:01.1: bridge window [mem 0xc1d00000-0xcdffffff]
pci 0000:00:01.1: bridge window [mem 0xce000000-0xd9ffffff 64bit pref]
pci 0000:06:00.0: [8086:1547] type 01 class 0x060400
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:03.0: [8086:1547] type 01 class 0x060400
pci 0000:06:03.0: supports D1 D2
pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:04.0: [8086:1547] type 01 class 0x060400
pci 0000:06:04.0: supports D1 D2
pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:05.0: [8086:1547] type 01 class 0x060400
pci 0000:06:05.0: supports D1 D2
pci 0000:06:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:06.0: [8086:1547] type 01 class 0x060400
pci 0000:06:06.0: supports D1 D2
pci 0000:06:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PCI bridge to [bus 06-6b]
pci 0000:05:00.0: bridge window [io 0x4000-0x5fff]
pci 0000:05:00.0: bridge window [mem 0xc1d00000-0xc9ffffff]
pci 0000:05:00.0: bridge window [mem 0xce000000-0xd5ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:07:00.0: [8086:1547] type 00 class 0x088000
pci 0000:07:00.0: reg 0x10: [mem 0xc1f00000-0xc1f3ffff]
pci 0000:07:00.0: reg 0x14: [mem 0xc1f40000-0xc1f40fff]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [mem 0xc1f00000-0xc1ffffff]
pci 0000:06:03.0: PCI bridge to [bus 08-38]
pci 0000:06:03.0: bridge window [io 0x4000-0x4fff]
pci 0000:06:03.0: bridge window [mem 0xc2000000-0xc5ffffff]
pci 0000:06:03.0: bridge window [mem 0xce000000-0xd1ffffff 64bit pref]
pci 0000:06:04.0: PCI bridge to [bus 39-69]
pci 0000:06:04.0: bridge window [io 0x5000-0x5fff]
pci 0000:06:04.0: bridge window [mem 0xc6000000-0xc9ffffff]
pci 0000:06:04.0: bridge window [mem 0xd2000000-0xd5ffffff 64bit pref]
pci 0000:06:05.0: PCI bridge to [bus 6a]
pci 0000:06:05.0: bridge window [mem 0xc1e00000-0xc1efffff]
pci 0000:06:06.0: PCI bridge to [bus 6b]
pci 0000:06:06.0: bridge window [mem 0xc1d00000-0xc1dfffff]
pci 0000:00:01.2: PCI bridge to [bus 02]
pci 0000:00:01.2: bridge window [mem 0xc1b00000-0xc1bfffff]
pci 0000:03:00.0: [14e4:16a3] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xc1800000-0xc180ffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xc1810000-0xc181ffff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: [14e4:16bc] type 00 class 0x080501
pci 0000:03:00.1: reg 0x10: [mem 0xc1820000-0xc182ffff 64bit pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: bridge window [mem 0xc1a00000-0xc1afffff]
pci 0000:00:1c.0: bridge window [mem 0xc1800000-0xc18fffff 64bit pref]
pci 0000:04:00.0: [14e4:4331] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xc1900000-0xc1903fff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 04]
pci 0000:00:1c.1: bridge window [mem 0xc1900000-0xc19fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Masking GPE 0x6.
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: overriding boot device: PCI:0000:01:00.0
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
Registered efivars operations
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008e000-0x0008ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0x8ad14000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8ad69000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8ae3a000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8aece000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8af8f000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8b000000-0x8bffffff]
e820: reserve RAM buffer [mem 0x26f600000-0x26fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
wmi: Mapper loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
system 00:01: [io 0x1000-0x100f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs APP000b (active)
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x20000000-0x201fffff] has been reserved
system 00:05: [mem 0x40000000-0x401fffff] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window
pci 0000:06:05.0: bridge window [io 0x1000-0x0fff] to [bus 6a] add_size 1000
pci 0000:06:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 6a] add_size 200000 add_align 100000
pci 0000:06:06.0: bridge window [io 0x1000-0x0fff] to [bus 6b] add_size 1000
pci 0000:06:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 6b] add_size 200000 add_align 100000
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc10fffff]
pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
pci 0000:06:05.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:06:05.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:06:06.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:06:06.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:06:05.0: res[7]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:06:05.0: res[7]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:06:06.0: res[7]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:06:06.0: res[7]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:06:05.0: BAR 9: no space for [mem size 0x00200000 64bit pref]
pci 0000:06:05.0: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:06:06.0: BAR 9: no space for [mem size 0x00200000 64bit pref]
pci 0000:06:06.0: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:06:05.0: BAR 7: no space for [io size 0x1000]
pci 0000:06:05.0: BAR 7: failed to assign [io size 0x1000]
pci 0000:06:06.0: BAR 7: no space for [io size 0x1000]
pci 0000:06:06.0: BAR 7: failed to assign [io size 0x1000]
pci 0000:06:06.0: BAR 9: no space for [mem size 0x00200000 64bit pref]
pci 0000:06:06.0: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:06:06.0: BAR 7: no space for [io size 0x1000]
pci 0000:06:06.0: BAR 7: failed to assign [io size 0x1000]
pci 0000:06:05.0: BAR 9: no space for [mem size 0x00200000 64bit pref]
pci 0000:06:05.0: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:06:05.0: BAR 7: no space for [io size 0x1000]
pci 0000:06:05.0: BAR 7: failed to assign [io size 0x1000]
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [mem 0xc1f00000-0xc1ffffff]
pci 0000:06:03.0: PCI bridge to [bus 08-38]
pci 0000:06:03.0: bridge window [io 0x4000-0x4fff]
pci 0000:06:03.0: bridge window [mem 0xc2000000-0xc5ffffff]
pci 0000:06:03.0: bridge window [mem 0xce000000-0xd1ffffff 64bit pref]
pci 0000:06:04.0: PCI bridge to [bus 39-69]
pci 0000:06:04.0: bridge window [io 0x5000-0x5fff]
pci 0000:06:04.0: bridge window [mem 0xc6000000-0xc9ffffff]
pci 0000:06:04.0: bridge window [mem 0xd2000000-0xd5ffffff 64bit pref]
pci 0000:06:05.0: PCI bridge to [bus 6a]
pci 0000:06:05.0: bridge window [mem 0xc1e00000-0xc1efffff]
pci 0000:06:06.0: PCI bridge to [bus 6b]
pci 0000:06:06.0: bridge window [mem 0xc1d00000-0xc1dfffff]
pci 0000:05:00.0: PCI bridge to [bus 06-6b]
pci 0000:05:00.0: bridge window [io 0x4000-0x5fff]
pci 0000:05:00.0: bridge window [mem 0xc1d00000-0xc9ffffff]
pci 0000:05:00.0: bridge window [mem 0xce000000-0xd5ffffff 64bit pref]
pci 0000:00:01.1: PCI bridge to [bus 05-9b]
pci 0000:00:01.1: bridge window [io 0x4000-0x6fff]
pci 0000:00:01.1: bridge window [mem 0xc1d00000-0xcdffffff]
pci 0000:00:01.1: bridge window [mem 0xce000000-0xd9ffffff 64bit pref]
pci 0000:00:01.2: PCI bridge to [bus 02]
pci 0000:00:01.2: bridge window [mem 0xc1b00000-0xc1bfffff]
pci 0000:03:00.0: BAR 6: assigned [mem 0xc1a00000-0xc1a007ff pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: bridge window [mem 0xc1a00000-0xc1afffff]
pci 0000:00:1c.0: bridge window [mem 0xc1800000-0xc18fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 04]
pci 0000:00:1c.1: bridge window [mem 0xc1900000-0xc19fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 20 [mem 0x8fa00000-0xfeafffff window]
pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc10fffff]
pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x4000-0x6fff]
pci_bus 0000:05: resource 1 [mem 0xc1d00000-0xcdffffff]
pci_bus 0000:05: resource 2 [mem 0xce000000-0xd9ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x4000-0x5fff]
pci_bus 0000:06: resource 1 [mem 0xc1d00000-0xc9ffffff]
pci_bus 0000:06: resource 2 [mem 0xce000000-0xd5ffffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xc1f00000-0xc1ffffff]
pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:08: resource 1 [mem 0xc2000000-0xc5ffffff]
pci_bus 0000:08: resource 2 [mem 0xce000000-0xd1ffffff 64bit pref]
pci_bus 0000:39: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:39: resource 1 [mem 0xc6000000-0xc9ffffff]
pci_bus 0000:39: resource 2 [mem 0xd2000000-0xd5ffffff 64bit pref]
pci_bus 0000:6a: resource 1 [mem 0xc1e00000-0xc1efffff]
pci_bus 0000:6b: resource 1 [mem 0xc1d00000-0xc1dfffff]
pci_bus 0000:02: resource 1 [mem 0xc1b00000-0xc1bfffff]
pci_bus 0000:03: resource 1 [mem 0xc1a00000-0xc1afffff]
pci_bus 0000:03: resource 2 [mem 0xc1800000-0xc18fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xc1900000-0xc19fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:14.0: enabling device (0000 -> 0002)
pci 0000:00:14.0: can't derive routing for PCI INT A
pci 0000:00:14.0: PCI INT A: no GSI
PCI: CLS 256 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 18936K
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x0000008b800000 end: 0x0000008f9fffff
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x78acf000-0x7cacf000] (64MB)
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1608650884.910:1): initialized
workingset: timestamp_bits=56 max_order=21 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.2: enabling device (0000 -> 0002)
pcieport 0000:06:03.0: enabling device (0000 -> 0003)
pcieport 0000:06:04.0: enabling device (0000 -> 0003)
pcieport 0000:06:05.0: enabling device (0000 -> 0002)
pcieport 0000:06:06.0: enabling device (0000 -> 0002)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:06:03.0:pcie204: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
pciehp 0000:06:03.0:pcie204: service driver pciehp loaded
pciehp 0000:06:04.0:pcie204: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
pciehp 0000:06:04.0:pcie204: service driver pciehp loaded
pciehp 0000:06:05.0:pcie204: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
pciehp 0000:06:05.0:pcie204: service driver pciehp loaded
pciehp 0000:06:06.0:pcie204: Slot #6 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
pciehp 0000:06:06.0:pcie204: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0x90020000, using 28800k, total 28800k
efifb: mode is 2880x1800x32, linelength=16384, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 360x112
fb0: EFI VGA frame buffer device
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
[drm] Initialized
ACPI Warning: \_SB.PCI0.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-88)
ACPI: \_SB_.PCI0.IGPU: failed to evaluate _DSM
ACPI Warning: \_SB.PCI0.P0P2.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-88)
ACPI: \_SB_.PCI0.P0P2.GFX0: failed to evaluate _DSM
nouveau 0000:01:00.0: enabling device (0006 -> 0007)
checking generic (90020000 1c20000) vs hw (90000000 10000000)
fb: switching to nouveaufb from EFI VGA
Console: switching to colour dummy device 80x25
nouveau 0000:01:00.0: NVIDIA GK107 (0e7150a2)
nouveau 0000:01:00.0: bios: version 80.07.26.04.01
nouveau 0000:01:00.0: fb: 1024 MiB GDDR5
[TTM] Zone kernel: Available graphics memory: 4038334 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.0
nouveau 0000:01:00.0: DRM: DCB outp 00: 048101b6 0f230010
nouveau 0000:01:00.0: DRM: DCB outp 01: 018212d6 0f220020
nouveau 0000:01:00.0: DRM: DCB outp 02: 01021212 00020020
nouveau 0000:01:00.0: DRM: DCB outp 03: 088324c6 0f220010
nouveau 0000:01:00.0: DRM: DCB outp 04: 08032402 00020010
nouveau 0000:01:00.0: DRM: DCB outp 05: 02843862 00020010
nouveau 0000:01:00.0: DRM: DCB conn 00: 00020047
nouveau 0000:01:00.0: DRM: DCB conn 01: 02208146
nouveau 0000:01:00.0: DRM: DCB conn 02: 01104246
nouveau 0000:01:00.0: DRM: DCB conn 03: 00410361
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
nouveau 0000:01:00.0: DRM: allocated 2880x1800 fb: 0x60000, bo ffff880265681c00
fbcon: nouveaufb (fb0) is primary device
tsc: Refined TSC clocksource calibration: 2294.791 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113fc2a727, max_idle_ns: 440795202126 ns
Console: switching to colour frame buffer device 360x112
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xc1c16000 port 0xc1c16100 irq 34
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 256 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xc1c16c00
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.248-gentoo-x86_64-gcc ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 256 is not supported
ehci-pci 0000:00:1d.0: irq 22, io mem 0xc1c16800
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.9.248-gentoo-x86_64-gcc ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
xhci_hcd 0000:00:14.0: PCI INT A: no GSI
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
xhci_hcd 0000:00:14.0: cache line size of 256 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.9.248-gentoo-x86_64-gcc xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.9.248-gentoo-x86_64-gcc xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usb-storage
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver appletouch
usbcore: registered new interface driver bcm5974
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
applesmc: key=493 fan=2 temp=44 index=43 acc=0 lux=2 kbd=1
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
EFI Variables Facility v0.08 2004-May-17
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: APPLE SSD SM256E, CXM09A1Q, max UDMA/133
ata1.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA APPLE SSD SM256E 9A1Q PQ: 0 ANSI: 5
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 3-2: new full-speed USB device number 2 using xhci_hcd
usb 2-1: new high-speed USB device number 2 using ehci-pci
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
apple_gmux: Found gmux version 3.2.19 [indexed]
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
apple_gmux: locked IO for PCI:0000:00:02.0
thunderbolt 0000:07:00.0: NHI initialized, starting thunderbolt
thunderbolt 0000:07:00.0: allocating TX ring 0 of size 10
thunderbolt 0000:07:00.0: allocating RX ring 0 of size 10
thunderbolt 0000:07:00.0: control channel created
thunderbolt 0000:07:00.0: control channel starting...
thunderbolt 0000:07:00.0: starting TX ring 0
thunderbolt 0000:07:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
thunderbolt 0000:07:00.0: starting RX ring 0
thunderbolt 0000:07:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
thunderbolt 0000:07:00.0: initializing Switch at 0x0 (depth: 0, up port: 5)
thunderbolt 0000:07:00.0: old switch config:
thunderbolt 0000:07:00.0: Switch: 8086:1547 (Revision: 3, TB Version: 1)
thunderbolt 0000:07:00.0: Max Port Number: 12
thunderbolt 0000:07:00.0: Config:
thunderbolt 0000:07:00.0: Upstream Port Number: 5 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 255ms
thunderbolt 0000:07:00.0: unknown1: 0x0 unknown4: 0x0
random: fast init done
thunderbolt 0000:07:00.0: resetting error on 0:0.
thunderbolt 0000:07:00.0: resetting error on 0:b.
thunderbolt 0000:07:00.0: resetting error on 0:c.
thunderbolt 0000:07:00.0: 0: uid: 0x1000000000000
thunderbolt 0000:07:00.0: Port 0: 8086:1547 (Revision: 3, TB Version: 1, Type: Port (0x1))
thunderbolt 0000:07:00.0: Max hop id (in/out): 7/7
thunderbolt 0000:07:00.0: Max counters: 8
thunderbolt 0000:07:00.0: NFC Credits: 0x700000
thunderbolt 0000:07:00.0: Port 1: 8086:1547 (Revision: 3, TB Version: 1, Type: Port (0x1))
thunderbolt 0000:07:00.0: Max hop id (in/out): 15/15
thunderbolt 0000:07:00.0: Max counters: 16
thunderbolt 0000:07:00.0: NFC Credits: 0x3c00000
thunderbolt 0000:07:00.0: Port 2: 8086:1547 (Revision: 3, TB Version: 1, Type: Port (0x1))
thunderbolt 0000:07:00.0: Max hop id (in/out): 15/15
thunderbolt 0000:07:00.0: Max counters: 16
thunderbolt 0000:07:00.0: NFC Credits: 0x3c00000
thunderbolt 0000:07:00.0: Port 3: 8086:1547 (Revision: 3, TB Version: 1, Type: Port (0x1))
thunderbolt 0000:07:00.0: Max hop id (in/out): 15/15
thunderbolt 0000:07:00.0: Max counters: 16
thunderbolt 0000:07:00.0: NFC Credits: 0x3c00000
thunderbolt 0000:07:00.0: Port 4: 8086:1547 (Revision: 3, TB Version: 1, Type: Port (0x1))
thunderbolt 0000:07:00.0: Max hop id (in/out): 15/15
thunderbolt 0000:07:00.0: Max counters: 16
thunderbolt 0000:07:00.0: NFC Credits: 0x3c00000
thunderbolt 0000:07:00.0: Port 5: 8086:1547 (Revision: 3, TB Version: 1, Type: NHI (0x2))
thunderbolt 0000:07:00.0: Max hop id (in/out): 11/11
thunderbolt 0000:07:00.0: Max counters: 16
thunderbolt 0000:07:00.0: NFC Credits: 0x700000
thunderbolt 0000:07:00.0: Port 6: 8086:1547 (Revision: 3, TB Version: 1, Type: PCIe (0x100101))
thunderbolt 0000:07:00.0: Max hop id (in/out): 8/8
thunderbolt 0000:07:00.0: Max counters: 2
thunderbolt 0000:07:00.0: NFC Credits: 0x700000
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/234 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
thunderbolt 0000:07:00.0: Port 7: 8086:1547 (Revision: 3, TB Version: 1, Type: PCIe (0x100101))
thunderbolt 0000:07:00.0: Max hop id (in/out): 8/8
thunderbolt 0000:07:00.0: Max counters: 2
thunderbolt 0000:07:00.0: NFC Credits: 0x700000
thunderbolt 0000:07:00.0: Port 8: 8086:1547 (Revision: 3, TB Version: 1, Type: PCIe (0x100101))
thunderbolt 0000:07:00.0: Max hop id (in/out): 8/8
thunderbolt 0000:07:00.0: Max counters: 2
thunderbolt 0000:07:00.0: NFC Credits: 0x700000
thunderbolt 0000:07:00.0: Port 9: 8086:1547 (Revision: 3, TB Version: 1, Type: PCIe (0x100101))
thunderbolt 0000:07:00.0: Max hop id (in/out): 8/8
thunderbolt 0000:07:00.0: Max counters: 2
thunderbolt 0000:07:00.0: NFC Credits: 0x700000
thunderbolt 0000:07:00.0: Port 10: ffff:ffff (Revision: 3, TB Version: 1, Type: DP/HDMI (0xe0102))
thunderbolt 0000:07:00.0: Max hop id (in/out): 9/9
thunderbolt 0000:07:00.0: Max counters: 2
thunderbolt 0000:07:00.0: NFC Credits: 0x700000
thunderbolt 0000:07:00.0: Port 11: 8086:1547 (Revision: 3, TB Version: 1, Type: DP/HDMI (0xe0101))
thunderbolt 0000:07:00.0: Max hop id (in/out): 9/9
thunderbolt 0000:07:00.0: Max counters: 2
thunderbolt 0000:07:00.0: NFC Credits: 0xf00000
thunderbolt 0000:07:00.0: Port 12: 8086:1547 (Revision: 3, TB Version: 1, Type: DP/HDMI (0xe0101))
thunderbolt 0000:07:00.0: Max hop id (in/out): 9/9
thunderbolt 0000:07:00.0: Max counters: 2
thunderbolt 0000:07:00.0: NFC Credits: 0xf00000
thunderbolt 0000:07:00.0: 0:1: is unplugged (state: 7)
thunderbolt 0000:07:00.0: 0:3: is unplugged (state: 7)
thunderbolt 0000:07:00.0: 0:0: hotplug: scanning
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
Netfilter messages via NETLINK v0.30.
usb 3-2: New USB device found, idVendor=0951, idProduct=16de
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: HyperX Pulsefire Core
usb 3-2: Manufacturer: Kingston
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ctnetlink v0.93: registering with nfnetlink.
input: Kingston HyperX Pulsefire Core as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:0951:16DE.0001/input/input4
hid-generic 0003:0951:16DE.0001: input,hidraw0: USB HID v1.11 Mouse [Kingston HyperX Pulsefire Core] on usb-0000:00:14.0-2/input0
input: Kingston HyperX Pulsefire Core as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:0951:16DE.0002/input/input5
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
hdaudio hdaudioC0D0: Unable to bind the codec
------------[ cut here ]------------
WARNING: CPU: 5 PID: 1142 at drivers/thunderbolt/switch.c:95 tb_wait_for_port+0x2da/0x350
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x306a9, pf=0x10, revision=0x21
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Magic number: 0:209:488
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
thunderbolt 0000:07:00.0: 0:0: does not have PHY
Modules linked in:
CPU: 5 PID: 1142 Comm: kworker/u16:10 Not tainted 4.9.248-gentoo-x86_64-gcc #4
Hardware name: Apple Inc. MacBookPro10,1/Mac-C3EC7CD22292981F, BIOS 262.0.0.0.0 06/10/2020
Workqueue: thunderbolt tb_handle_hotplug
ffffc90000ecbcd8 ffffffff81366973 ffffc90000ecbd28 0000000000000000
ffffc90000ecbd18 ffffffff81138bb9 000000090d7a0546 0000000000000000
ffff88026578ced0 0000000000000000 0000000000000000 ffff8802653ea200
Call Trace:
[] dump_stack+0x57/0x74
[] __warn.cold+0x15/0x30
[] warn_slowpath_fmt+0x5a/0x80
[] tb_wait_for_port+0x2da/0x350
[] ? _dev_info+0x67/0x80
[] tb_scan_port+0x5c/0x180
[] tb_handle_hotplug+0x19b/0x270
[] process_one_work+0x1cb/0x470
[] worker_thread+0x37/0x520
[] ? process_one_work+0x470/0x470
[] kthread+0xd5/0xf0
[] ? kthread_create_on_node+0x60/0x60
[] ret_from_fork+0x3e/0x60
---[ end trace 96eecf0285ac8824 ]---
thunderbolt 0000:07:00.0: 0:0: hotplug: no switch found
thunderbolt 0000:07:00.0: 0:b: hotplug: scanning
thunderbolt 0000:07:00.0: 0:b: hotplug: no switch found
thunderbolt 0000:07:00.0: 0:c: hotplug: scanning
thunderbolt 0000:07:00.0: 0:c: hotplug: no switch found
console [netcon0] enabled
netconsole: network logging started
PM: Hibernation image not present or could not be loaded.
ALSA device list:
#0: HDA Intel PCH at 0xc1c10000 irq 37
Freeing unused kernel memory: 1180K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 368K
Freeing unused kernel memory: 1276K
hid-generic 0003:0951:16DE.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Kingston HyperX Pulsefire Core] on usb-0000:00:14.0-2/input1
hid-generic 0003:0951:16DE.0003: hiddev0,hidraw2: USB HID v1.11 Device [Kingston HyperX Pulsefire Core] on usb-0000:00:14.0-2/input2
clocksource: Switched to clocksource tsc
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
usb 2-1.8: new high-speed USB device number 3 using ehci-pci
usb 1-1.1: New USB device found, idVendor=05ac, idProduct=8510
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: FaceTime HD Camera (Built-in)
usb 1-1.1: Manufacturer: Apple Inc.
usb 1-1.1: SerialNumber: DJHC7XZ4CXDNYGE0
udevd[2607]: starting version 3.2.9
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
udevd[2608]: starting eudev-3.2.9
usb 2-1.8: New USB device found, idVendor=0424, idProduct=2512
usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1.8:1.0: USB hub found
hub 2-1.8:1.0: 2 ports detected
ata_id (2641) used greatest stack depth: 13928 bytes left
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
findfs (2674) used greatest stack depth: 13624 bytes left
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
mount (2689) used greatest stack depth: 13432 bytes left
mountpoint (2697) used greatest stack depth: 13384 bytes left
hdaudio hdaudioC1D0: Unable to bind the codec
test (2722) used greatest stack depth: 12840 bytes left
usb 2-1.8.1: new full-speed USB device number 4 using ehci-pci
usb 2-1.8.1: New USB device found, idVendor=0a5c, idProduct=4500
usb 2-1.8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8.1: Product: BRCM20702 Hub
usb 2-1.8.1: Manufacturer: Apple Inc.
hub 2-1.8.1:1.0: USB hub found
hub 2-1.8.1:1.0: 3 ports detected
usb 2-1.8.2: new full-speed USB device number 5 using ehci-pci
usb 2-1.8.2: New USB device found, idVendor=05ac, idProduct=0263
usb 2-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8.2: Product: Apple Internal Keyboard / Trackpad
usb 2-1.8.2: Manufacturer: Apple Inc.
input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/0003:05AC:0263.0004/input/input6
apple 0003:05AC:0263.0004: input,hidraw3: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-1.8.2/input0
apple 0003:05AC:0263.0005: hidraw4: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-1.8.2/input1
input: bcm5974 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.2/input/input7
usb 2-1.8.1.1: new full-speed USB device number 6 using ehci-pci
usb 2-1.8.1.1: New USB device found, idVendor=05ac, idProduct=820a
usb 2-1.8.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 05ac:820a as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1.1/2-1.8.1.1:1.0/0003:05AC:820A.0006/input/input8
hid-generic 0003:05AC:820A.0006: input,hidraw5: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:1d.0-1.8.1.1/input0
usb 2-1.8.1.2: new full-speed USB device number 7 using ehci-pci
usb 2-1.8.1.2: New USB device found, idVendor=05ac, idProduct=820b
usb 2-1.8.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 05ac:820b as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1.2/2-1.8.1.2:1.0/0003:05AC:820B.0007/input/input9
hid-generic 0003:05AC:820B.0007: input,hidraw6: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:1d.0-1.8.1.2/input0
usb 2-1.8.1.3: new full-speed USB device number 8 using ehci-pci
usb 2-1.8.1.3: New USB device found, idVendor=05ac, idProduct=8286
usb 2-1.8.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8.1.3: Product: Bluetooth USB Host Controller
usb 2-1.8.1.3: Manufacturer: Apple Inc.
cgroup: cgroup2: unknown option "nsdelegate"
udevd[3162]: starting version 3.2.9
udevd[3162]: starting eudev-3.2.9
bcma: bus0: Found chip with id 0x4331, rev 0x02 and package 0x09
bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0)
bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0)
Linux video capture interface: v2.00
bcma: bus0: Bus registered
uvcvideo: Found UVC 1.00 device FaceTime HD Camera (Built-in) (05ac:8510)
input: FaceTime HD Camera (Built-in) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
b43-phy0: Broadcom 4331 WLAN found (core revision 29)
b43-phy0: Found PHY: Analog 9, Type 7 (HT), Revision 1
b43-phy0: Found Radio: Manuf 0x17F, ID 0x2059, Revision 0, Version 1
b43-phy0 warning: 5 GHz band is unsupported on this PHY
Broadcom 43xx driver loaded [ Features: PNL ]
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
b43 bcma0:1 wlp4s0b1: renamed from wlan0
udevd[3248]: Unable to EVIOCGABS device "/dev/input/event6"
udevd[3248]: Unable to EVIOCGABS device "/dev/input/event6"
udevd[3248]: Unable to EVIOCGABS device "/dev/input/event6"
udevd[3248]: Unable to EVIOCGABS device "/dev/input/event6"
ip (3547) used greatest stack depth: 12768 bytes left
EXT4-fs (sda2): re-mounted. Opts: discard,commit=60
IPv6: ADDRCONF(NETDEV_UP): wlp4s0b1: link is not ready
b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
IPv6: ADDRCONF(NETDEV_UP): wlp4s0b1: link is not ready
b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
IPv6: ADDRCONF(NETDEV_UP): wlp4s0b1: link is not ready
elogind-daemon[4331]: New seat seat0.
elogind-daemon[4331]: Watching system buttons on /dev/input/event3 (Power Button)
elogind-daemon[4331]: Watching system buttons on /dev/input/event1 (Power Button)
elogind-daemon[4331]: Watching system buttons on /dev/input/event0 (Lid Switch)
elogind-daemon[4331]: Watching system buttons on /dev/input/event2 (Sleep Button)
elogind-daemon[4331]: Watching system buttons on /dev/input/event5 (Kingston HyperX Pulsefire Core)
elogind-daemon[4331]: Watching system buttons on /dev/input/event8 (HID 05ac:820a)
elogind-daemon[4331]: Watching system buttons on /dev/input/event6 (Apple Inc. Apple Internal Keyboard / Trackpad)
elogind-daemon[4331]: New session c1 of user sddm.
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
IPv6: ADDRCONF(NETDEV_UP): wlp4s0b1: link is not ready
b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
IPv6: ADDRCONF(NETDEV_UP): wlp4s0b1: link is not ready
wlp4s0b1: authenticate with 84:a0:6e:eb:8c:c0
wlp4s0b1: send auth to 84:a0:6e:eb:8c:c0 (try 1/3)
wlp4s0b1: authenticated
wlp4s0b1: associate with 84:a0:6e:eb:8c:c0 (try 1/3)
wlp4s0b1: RX AssocResp from 84:a0:6e:eb:8c:c0 (capab=0x411 status=0 aid=3)
wlp4s0b1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0b1: link becomes ready
elogind-daemon[4331]: New session 1 of user tux.
elogind-daemon[4331]: Removed session c1.
xauth (4562) used greatest stack depth: 12400 bytes left
fs_mark (6252) used greatest stack depth: 12328 bytes left
kworker/dying (1142) used greatest stack depth: 12104 bytes left
CPU4: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: [Hardware Error]: Machine check events logged
CPU4: Core temperature/speed normal
CPU6: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU4: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU4: Core temperature above threshold, cpu clock throttled (total events = 5104)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 5142)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 5142)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 5142)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 5142)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 5142)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 5142)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 5142)
mce: [Hardware Error]: Machine check events logged
CPU4: Core temperature/speed normal
CPU1: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU4: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU4: Core temperature above threshold, cpu clock throttled (total events = 5388)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 5426)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 5426)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 5426)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 5426)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 5426)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 5426)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 5426)
mce: [Hardware Error]: Machine check events logged
CPU4: Core temperature/speed normal
CPU6: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU4: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU4: Core temperature above threshold, cpu clock throttled (total events = 5737)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 5777)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 5777)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 5777)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 5777)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 5777)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 5777)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 5777)
mce: [Hardware Error]: Machine check events logged
CPU4: Core temperature/speed normal
CPU5: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU4: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU4: Core temperature above threshold, cpu clock throttled (total events = 5779)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 5819)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 5819)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 5819)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 5819)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 5819)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 5819)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 5819)
mce: [Hardware Error]: Machine check events logged
CPU4: Core temperature/speed normal
CPU5: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU4: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged